Parameter: Redundancy Mode
•
Default Setting: PRP
When the Operating Mode is set to Switch, redundancy options are available to select.
Parameter Description
RSTP Rapid spanning tree protocol
OSM Legacy Siemens redundancy protocol.
PRP Parallel redundancy protocol
HSR High-availability seamless redundancy
For detailed information on the parameterization of the Advanced setting please refer to the Communica-
tions manual.
Device Functionality
3.7 Data Communications
126 Reyrolle 7SR5, Transformer Protection Device, Device Manual
C53000-G7040-C015-1, Edition 11.2019
To Next Page
Loading...
