Siemens Reyrolle 7SR54 - Application and Setting Notes

[lo_7SR5_51logicdiagramAdditionalSettings, 1, en_US]
Figure 5-19
Logic Diagram: 51 Time Delayed Overcurrent – Phase (Additional Settings Using VT Inputs)
Application and Setting Notes
Parameter: 51V Element (Ph-Ph)
•
Default setting: Disabled
This setting switches the element on or off dependent on the requirements of the application.
5.14.4
Protection and Automation Functions
5.14 51 Time-Delayed Overcurrent – Phase
Reyrolle 7SR5, Transformer Protection Device, Device Manual 231
C53000-G7040-C015-1, Edition 11.2019