Certification
5
The RUGGEDCOM RMC20 device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
5.1 Approvals
This section details the approvals issued for the RUGGEDCOM RMC20.
5.1.1 CSA
This device is certified by the CSA Group to meet the requirements of the following
standards:
• CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
• UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements)
5.1.2 European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
• EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
• EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
RUGGEDCOM RMC20
Installation Manual, 04/2021, C79000-G8976-1007-10
27
To Next Page
Loading...
