Siemens RUGGEDCOM RS8000T User Manual

Certification
6.1.6RoHS
• Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
• Radiocommunications (Compliance Labelling – Electromagnetic Radiation)
Notice 2003 made under Section 182 of the Radiocommunications Act 1992
• Telecommunications Labelling (Customer Equipment and Customer Cabling)
Notice 2001 made under Section 407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.6 RoHS
This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
A copy of the Material Declaration is available online at https://
support.industry.siemens.com/cs/ww/en/view/109738831.
6.2 EMC and Environmental Type Tests
The RUGGEDCOM RS8000T has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
Test Description Test Levels Severity
Levels
Enclosure
Contact
±8 kV 4IEC
61000-4-2
ESD
Enclosure Air ±15 kV 4
IEC
61000-4-3
Radiated RFI Enclosure
ports
20 V/m x
Signal ports ±4 kV @ 2.5 kHz xIEC
61000-4-4
Burst (Fast Transient)
DC Power
ports
±4 kV 4
RUGGEDCOM RS8000T
Installation Manual, 01/2021, C79000-G8976-1023-05
27

Siemens RUGGEDCOM RS8000T Specifications

General

Brand	Siemens
Model	RUGGEDCOM RS8000T
Category	Industrial Equipment
Language	English