Siemens RUGGEDCOM RSG909R Installation Guide

RUGGEDCOM RSG909R
Installation Guide
Chapter 5
Technical Specifications
Copper Ethernet Port Specifications 31
Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Description
IEEE 802.3z
ü
1000Base-LX
IEEE 802.3ab
ü
1000Base-Tx
IEEE 802.3ad
ü
Link Aggregation
IEEE 802.1D
ü ü ü
MAC Bridges
IEEE 802.1D
ü ü ü
Spanning Tree Protocol (STP)
IEEE 802.1p
ü ü ü
Class of Service (CoS)
IEEE 802.1Q
ü ü ü
VLAN (Virtual LAN) Tagging
IEEE 802.1w
ü ü ü
Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1x
ü ü ü
Port-Based Network Access Control
IEEE 802.1Q-2005
ü ü ü
Multiple Spanning Tree Protocol (MSTP)
IEEE 1588-2008
ü ü ü
Precision Time Protocol (PTP) Version 2
IEC 62439-2:2016
ü ü
Media Redundancy Protocol (MRP)
IEC 62439-3:2016
ü ü ü
High-Availability Seamless Redundancy
(HSR), Parallel Redundancy Protocol (PRP)
Section5.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RSG909R.
Speed
e
10/100/1000Base-TX
Connector RJ45
Duplex
e
FDX/HDX
Cable Type
f
> CAT 5
Wiring Standard
g
TIA/EIA T568A/B
Maximum Distance
h
100 m (328 ft)
Isolation
i
1.5 kV
e
Auto-negotiating.
f
Shielded.
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.

Siemens RUGGEDCOM RSG909R Specifications

General

Brand	Siemens
Model	RUGGEDCOM RSG909R
Category	Switch
Language	English