Siemens RUGGEDCOM RSG909R - Certification; Approvals; Csa

RUGGEDCOM RSG909R
Installation Guide
Chapter 6
Certification
Approvals 35
Certification
The RUGGEDCOM RSG909R device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
CONTENTS
• Section6.1, “Approvals”
• Section6.2, “EMC and Environmental Type Tests”
Section6.1
Approvals
This section details the standards to which the RUGGEDCOM RSG909R complies.
CONTENTS
• Section6.1.1, “CSA”
• Section6.1.2, “CSA/Sira”
• Section6.1.3, “European Union (EU)”
• Section6.1.4, “FCC”
• Section6.1.5, “FDA/CDRH”
• Section6.1.6, “ISED”
• Section6.1.7, “TÜV SÜD”
• Section6.1.8, “RRA”
• Section6.1.9, “RoHS”
• Section6.1.10, “Other Approvals”
Section6.1.1
CSA
This device meets the requirements of the following Canadian and U.S. standards under certificate CSA
18CA70171440:
• CAN/CSA C22.2 No. 60950-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
• CSA Std. C22.2 No. 213-16
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations