Siemens RUGGEDCOM RSG910C - Page 19

Installing the Device
2.3.2Mounting the Device to a Panel
To mount the device to a panel, do the following:
1. Secure the mounting adapters to the top and bottom of the device using the
four M4 screws each included with the device.
2
1
2
1
1
Screw (M4)
2
Panel Mount Adapter
Figure2.4 Panel Mount Adapter Assembly
2. Prepare mounting holes in the panel where the device is to be installed.
10
RUGGEDCOM RSG910C
Installation Manual, 02/2020, C79000-G8976-1405-06