Siemens RUGGEDCOM RSG910C User Manual

Communication Ports
4.2SFP Transceivers
4.2 SFP Transceivers
The RUGGEDCOM RSG910C supports up to four Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers avail-
able from Siemens.
LEDs
Each socket features an LED that indicates its link state.
State Description
Green (Solid) Link established
Green (Blinking) Activity
Off No link detected
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the RUGGED-
COM RSG910C, as well as instructions for ordering and installation/removal, re-
fer to the RUGGEDCOM SFP Transceiver Catalog [https://support.industry.siemen-
s.com/cs/ca/en/view/109482309] .
IMPORTANT
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
RUGGEDCOM RSG910C
Installation Manual, 02/2020, C79000-G8976-1405-06
23

Siemens RUGGEDCOM RSG910C Specifications

General

Brand	Siemens
Model	RUGGEDCOM RSG910C
Category	Switch
Language	English