44/93
Building Technologies Division User Manual RWF55... CC1U7867en
Infrastructure & Cities Sector 6 Operation 05.11.2013
6.6 Starting the self-setting function
*
Press + for 5 seconds
*
Cancel with +
7867z04/0612
Figure 23: Display of self-setting function
When tUnE stops flashing, the self-setting function has been ended.
The parameters calculated by the controller are automatically adopted!
Note!
It is not possible to start tUnE in manual control or low-fire operation.
Start
Cancel
To Next Page
Loading...
Need help?
General
