Siemens SCALANCE M874-3 - Secure VPN Tunnel with Certificates; Configuring a VPN Tunnel with the SCT V3.X; Creating the Project and Modules

VPN tunnel between SCALANCE M-800 and S612
3.3 Secure VPN tunnel with certificates
SCALANCE M-800 Getting Started
116 Getting Started, 06/2015, C79000-G8976-C337-04
3.3
Secure VPN tunnel with certificates
3.3.1
Configuring a VPN tunnel with the SCT V3.x
3.3.1.1
Creating the project and modules
Procedure
1. Start the Security Configuration Tool V3.x on the PC.
2. Select the menu command "Project" > "New".
3. In the dialog that follows, create a new user with a user name and the corresponding
password. The "administrator" role is assigned to the user automatically.
4. Confirm the dialog with "OK". A new project has been created and the "Selection of a
module or software configuration" dialog is open.