Connecting SCALANCE M-800 to WAN
1.2 Connecting M81x to ADSL
SCALANCE M-800 Getting Started
36 Getting Started, 06/2015, C79000-G8976-C337-04
Specifying device information
To allow better identification of the SCALANCE M81x, specify general device information.
1. Click "System" > "General" in the navigation panel and on the "Device" tab in the content
area.
2. In "System Name", enter M800" as the system name for the device.
3. Enter the contact person responsible for the device in "System Contact".
4. Enter the identifier for the location at which the device is installed in "System Location",
for example the room number.
5. Click the "Set Values" button.
The general device information for the SCALANCE M81x has been specified.
To Next Page
Loading...
