Siemens SCALANCE M874-3 - Configuring a VPN Tunnel with the SCT V4.X; Creating Project and Modules with SCT

VPN tunnel between SCALANCE M-800 and security CPs
4.3 Secure VPN tunnel with certificates
SCALANCE M-800 Getting Started
168 Getting Started, 06/2015, C79000-G8976-C337-04
4.3.2
Configuring a VPN tunnel with the SCT V4.x
4.3.2.1
Creating project and modules with SCT
Procedure
1. On the "Security" tab of the object properties of the CP 1628, select the "Enable security"
check box.
2. In the dialog that follows, create a new user with a user name and the corresponding
password.
The "administrator" role is assigned to the user automatically.
3. Confirm the dialog with "OK". A new project is created.
4. In HW Config, open the Security Configuration Tool with the "Edit" > "Security
Configuration Tool" menu command.
The created CP is displayed in the list of configured modules.