Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
55
6. Confirm the dialogs with "OK" and close the Control Panel.
7. Enter the IP address assigned to the M826 from the "Settings used (Page 50)" table in
the address box of the Web browser. If there is a problem-free connection to the device,
the login page of Web Based Management (WBM) is displayed.
To Next Page
Loading...
