Siemens SCALANCE W748-1 RJ-45 - ARP; Neighbors; ARP-Tabelle

Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
125
●
Function tag
Shows the function tag (plant designation) of the device. The plant designation (HID) is
created during configuration of the device with HW Config of STEP 7.
●
Location tag
Shows the location tag of the device. The location identifier (LID) is created during
configuration of the device with HW Config of STEP 7.
●
Date
Shows the date created during configuration of the device with HW Config of STEP 7.
●
Descriptor
Shows the description created during configuration of the device with HW Config of
STEP 7.
6.4.4
ARP / neighbors
6.4.4.1
ARP-Tabelle
Assignment of MAC address and IPv4 address
With the Address Resolution Protocol (ARP), there is a unique assignment of MAC address
to IPv4 address. This assignment is kept by each network node in its own separate ARP
table. The WBM page shows the ARP table of the device.
Description of the displayed values
The table has the following columns:
●
Interface
Shows the interface via which the row entry was learnt.
●
MAC Address
Shows the MAC address of the destination or source device.