Siemens SCALANCE W748-1 RJ-45 User Manual

SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
9
Introduction
1
1.1
Information on the Configuration Manual
Validity of the configuration manual
This Configuration Manual covers the following products:
● SCALANCE W748-1 M12
● SCALANCE W748-1 RJ-45
● SCALANCE W788-1 M12
● SCALANCE W788-2 M12
● SCALANCE W788-2 M12 EEC
● SCALANCE W788-1 RJ-45
● SCALANCE W788-2 RJ-45
● SCALANCE W786-1 RJ-45
● SCALANCE W786-2 RJ-45
● SCALANCE W786-2IA RJ-45
● SCALANCE W786-2 SFP
This Configuration Manual applies to the following software version:
● SCALANCE W700 firmware as of version V 6.3
Note
This configuration manual does not apply to the SCALANCE W7xC
-2.
Purpose of the Configuration Manual
This Configuration Manual is intended to provide you with the information you require to
install, commission and operate devices correctly. It explains how to configure the devices
and how to integrate them in a WLAN network.
How you install and connect up the device correctly is described in the operating instructions
of the device.

Siemens SCALANCE W748-1 RJ-45 Specifications

General

Brand	Siemens
Model	SCALANCE W748-1 RJ-45
Category	Wireless Access Point
Language	English