SCALANCE X-300
Compact Operating Instructions, 05/2016, A5E00982643-14
15
Unpacking and checking
Unpacking, checking
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Components of the product
The following components are supplied with a SCALANCE X-300:
● Device with C-PLUG exchangeable medium.
● A four-pin terminal block for the 24 VDC power supply.
● A two-pin terminal block for the signaling contact.
● Product CD with documentation and software.
To Next Page
Loading...
