EasyManua.ls Logo

Siemens SCALANCE X-300 Series

Siemens SCALANCE X-300 Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SCALANCE X-300
Compact Operating Instructions, 05/2016, A5E00982643-14
35
Assembling
4
4.1
Safety notices for installation
Safety notices
When installing the device, keep to the safety notices listed below.
4.2
Suitable installation location at temperatures above 50 °C
WARNING
Suitable installation location at temperatures above 50 °C
If a device is operated in an ambient temperature of more than 50 °C, the temperature of
the device housing may be higher than 70 °C.
When installing the device, select a location where only qualified service personnel or
trained users have access to it.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
The replacement of components may impair suitability for Class 1, Division 2 or zone 2.
WARNING
The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
WARNING
When used in hazardous environments corresponding to Class I, Division 2 or Class I,
Zone 2, the device must be installed in a cabinet or a suitable enclosure.

Table of Contents

Other manuals for Siemens SCALANCE X-300 Series

Related product manuals