Description
2.2 Ergonomic design
3VA molded case circuit breakers with UL and IEC certification
32 Manual, 01/2019, L1V30435333-01
The possible breaker positions of manual rotary operators are listed below:
● ON - red marking
● TRIP - yellow marking
● OFF - green marking
The handle clearly engages in one of these positions depending on the status of the molded
case circuit breaker. The breaker positions are color-coded so that you can identify the
status of the circuit breaker at a glance.
You can retrofit an active illumination kit to manual rotary operators. The illuminated indicator
in the rotary handle signals the relevant breaker position in the colors red, yellow and green.
This provides clear visualization of the breaker position on-site in conditions of poor visibility.
To Next Page
Loading...
