Description
2.3 Technical details
3VA molded case circuit breakers with UL and IEC certification
46 Manual, 01/2019, L1V30435333-01
"Internal accessories" adhesive label
You can make a note of the number of installed accessory components on the "Internal
accessories" adhesive label. This will enable you to ascertain which accessories are installed
without removing the accessory cover and to use the information, for example, to reorder
components. In addition, the breaking capacities according to UL 489 and IEC 60947-2 are
named here again. This information is identical to the information on the accessory cover.
To Next Page
Loading...
