Accessories
4.3 Connection system
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03
271
Control wire tap for busbar connector
This control wire tap is installed at the 3VA molded case circuit breaker with the busbar.
It can also be installed using:
● Front bus connectors extended
● Front bus connectors offset
● Bus connectors edgewise
● Nut keeper kits, right-angled
The following connections can be selected for the control wire tap:
Bare conductor
Wire-end ferrule
Ring terminal
Cable lug (connector)
To Next Page
Loading...
