Description
2.3 Technical details
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03
45
The label insert can be found in the right-hand accessory compartment. When an accessory
(e.g. motor operator or manual operator) is installed on the circuit breaker, this label can be
attached to the accessory.
The label insert displays the following information:
● Information about the molded case circuit breaker
● Article number
● Key electrical data
Internal accessories label
You can make a note of the number of installed accessories on the internal accessories
label. This will enable you to ascertain which accessories are installed without removing the
accessory cover and to use the information, for example, to reorder components.
To Next Page
Loading...
