1   Introduction 
Multifunctional Danger Control and Indicating Panels SIGMASYS C and M (M-Modules)  3 / 128 
Best.Nr. A24205-A337-B970 – Edition 12 (03/07) 
1.2  Further information  
 
1.2.1  Documentation  
These instructions are part of a set of documentation available for SIGMASYS.  
Document and target group  Order number 
SIGMASYS C and M (M modules) danger alarm control and indicating pan-
els: fire alarm system and intrusion alarm system installation instructions  
Electrical specialists of the Region/regional office installing the system. Trained 
personnel involved in: 
- installation 
-  commissioning and  
- maintenance 
A24205-A337-B944 
SIGMASYS C and M, SIGMANET, fire alarm system and intrusion alarm 
system operating instructions  
The operating instructions are intended for electrical specialists of the Re-
gion/regional office installing the system. Trained personnel involved in: 
- installation 
-  commissioning and  
- maintenance 
-  personnel within the customer organization who have been familiarized 
  with the system (e.g. technical operator) 
A24205-A337-B990 
SIGMASYS C and M Fire alarm system and intrusion alarm system com-
missioning and acceptance checklist 
Electrical specialists of the Region/regional office installing the system. Trained 
personnel involved in: 
- commissioning 
A24205-A337-B987 
SIGMASYS C, M and M modules Fire alarm system planning instructions 
Project planners/sales representatives at the regional offices/Regions 
A24205-A337-B970 
SIGMASYS C, M and M modules Fire alarm system planning instructions 
Project planners/sales representatives at the regional offices/Regions 
A24205-A333-A329 
Manual  
Maintenance guidelines for fire alarm systems 
Electrical specialists of the Region/regional office installing the system. Trained 
personnel involved in: 
- maintenance 
 
A24205-A331-A301 
1.2.2  Information on the Internet 
The permanent collection contains further information such as short descriptions, product 
sheets, product catalogs, etc.. This is also where you will find the latest version of these in-
structions and the latest version of the documents listed on page  Fehler! Textmarke nicht 
definiert. of the “Documents” section in PDF format. All information is continuously being ex-
panded and updated!  
 
You will find the collection in the Siemens Intranet under the following address: 
Company/Organization  URL 
SBT DE 
https://intranet.sgt.siemens.de/zs/bs/pages/standsammlung.asp 
 
You will find general information about Siemens building services engineering and alarm cen-
ters in the Internet under: 
Company/Organization  URL 
SBT DE 
https://intranet.sgt.siemens.de/zs/bs/pages/startseite.asp