1 Introduction
SBT FSP DE
http://sgs.siemens.de/asp/FSP-Intranet/index.asp
1.2.3 Training courses
The personnel responsible for installing and commissioning the systems will receive all the in-
formation they need in special training courses.
These training courses are offered in the SBT DE Training Center.
You will find information on training courses on the Siemens Intranet under the following ad-
dress:
https://intranet.sbt.siemens.de/page.asp?nid=622
1.3 Notational conventions
Convention/symbol Explanation
1. Operating step Operating instructions are indicated by numbers.
• List
Lists are indicated by a bullet.
Important information
Important information is displayed in bold.
http://www.siemens.de
Text which you must enter yourself, (e. g. Internet addresses), is formatted in
the font ‘Courier New’.
Note
Notes or recommendations are indicated by this symbol and shown on a col-
ored background.
Warning
Information which you absolutely must read is indicated by this symbol and
shown on a colored background.
See section XY
Section references and links are indicated by this symbol and shown on a col-
ored background.
4 / 128 BMT Project Planning Guidelines
Best.Nr. A24205-A337-B970 – Edition 12 (03/07)
To Next Page
Loading...
