Siemens SIMATIC 6DL1131-6DF00-0PK0 - Parameters; Parameter Types; Module;Channel Parameters

Parameters
6
6.1 Parameter types
De󹪝nition
You de󹪝ne and thereby in󹪞uence the functions supported by the module operation of the I/O
module via the parameter types.
6.2 Module/channel parameters
De󹪝nition
Module/channel parameters are speci󹪝c parameters whose con󹪝guration can a󹪜ect the entire
module or channel.
Description
The following module/channel parameters are available:
Note
Unused channels
Deactivate unused channels in the con󹪝guration to improve the cycle time of the module. A
deactivated channel always returns the output value 0 mA.
Parameter Value range Default Parameter re‐
assignment in
RUN
E󹪟ciency range
Channel activated
(Page 20)
• Activated
• Deactivated
Activated Yes Channel
Diagnostics: No supply volt‐
age L+ (Page 21)
• Activated
• Deactivated
Activated Yes Module
Diagnostics, Wire break
1
(Page 21)
• Activated
• Deactivated
Activated Yes Channel
Wire break check
2
(Page 21)
• Activated
• Deactivated
Activated Yes Channel
DI 8x24...125VDC HA
Equipment Manual, 10/2021, A5E39288633-AD 19