Siemens SIMATIC 6DL1131-6DF00-0PK0 - Channel Status; Fault Leds; Pwr Led; Interrupts

7.2.3 Channel status / fault LEDs
De󹪝nition
The channel status and channel fault LEDs provide you information about the status and faults
of the channels.
Description
The channel status and channel fault LEDs indicate the following:
Channel
status LED
Channel
fault LED
Meaning
O󹪜 O󹪜
Channel deactivated or module switched o󹪜
On O󹪜
Channel enabled and no channel/module diagnostics pending.
O󹪜 On
Channel enabled and channel diagnostics/module diagnostics pending.
7.2.4 PWR LED
De󹪝nition
The PWR LED provides you status information about supply voltage L+.
Description
The PWR LED indicates the following status:
PWR LED Meaning
O󹪜
Supply voltage L+ missing.
On
Supply voltage L+ present.
7.3 Interrupts
De󹪝nition
A diagnostic interrupt reports activated events of a device status to the system operator who has
the appropriate operating authorization (maintenance and service).
Displays and interrupts
7.3 Interrupts
DI 8x24...125VDC HA
Equipment Manual, 10/2021, A5E39288633-AD 25