Description
The I/O module supports diagnostic interrupts.
The I/O module generates a diagnostic interrupt for the following events:
• Wire break
• Supply voltage missing
• Module is faulty
• Channel/component temporarily unavailable
• Hardware interrupt lost
• Parameter assignment error
• Retentive memory in carrier module defective
• Retentive memory in the terminal block defective
Note
A pending "Module is defective" or "Overtemperature" diagnostic is not deleted from the module
without a restart.
Displays and interrupts
7.3 Interrupts
DI 8x24...125VDC HA
26 Equipment Manual, 10/2021, A5E39288633-AD
To Next Page
Loading...
