Siemens SIMATIC AFD4 - Safety Instructions for Connection; Figure 2-2 Schematic Representation of the Interior (AFD4)

Installing and connecting
2.3 Safety instructions for connection
Active field distributors AFD4, AFD4 (FM), AFD8 and AFS
14 Product Information, 02/2015, A5E03775304-AC
2.3
Safety instructions for connection
Safety information
Note
When laying cables and wiring, make sure that you adhere to the installation regulations in
accordance with EN
60079-14 and any regulations specific to your country.
DANGER
Explosion hazard
Sparks may occur when connecting in some circumstances.
Therefore, use a
non-magnetic
screwdriver when connecting the cables.
DANGER
Explosion hazard
A tensile load on the screws of the AFD4, AFD4 (FM), AFD8 and AFS can impair the
degree of protection and is not permitted.
Implement a fixed Installation for inlet of the cable!
Schematic representation of the interior
Figure 2-2 Schematic representation of the interior (AFD4)