Product Overview
2-9
C7-635 Control System
A5E00155581-04
Accessories
The following components can be ordered as C7-635 accessories:
• I/O set with two modules for I/O expansion directly on the device
6ES7635-0AA00-6AA0
Consisting of:
– A cable, approximately 0.25 m (for connecting the C7-635 to the S7 module)
– A cable, approximately 0.08 m (for connecting the S7 module to the
S7 module)
– Mounting plate with S7 DIN rails including four Kombitorx screws (screwed
to the back of the device)
• I/O set with four modules for I/O expansion directly on the device
6ES7635-0AA00-6BA0
Consisting of:
– A cable, approximately 0.20 m
– S7 DIN rail, 190 mm including 4 countersunk screws (screwed to the back of
the device)
• Cable, 1.5 m, for I/O expansion up to a maximum distance of 1.5 m
6ES7635-0AA00-6CA0
You must order a standard DIN rail for the S7-300 programmable controller in
addition.
• Connector set with screw terminals for C7 I/O with coding profiles and
coding carriers 6ES7635-0AA00-4AA0 or
• Connector set with spring-loaded terminals for C7 I/O with coding profiles
and coding carriers 6ES7635-0AA00-4BA0
• Grounding bar with shielding terminals for analog I/O
6ES7635-0AA00-6EA0
• Protective film for the C7-635 display
6AV6574-1AD00-4AX0
• Paper documentation C7-635 control system
Consisting of:
– C7-635 manual in the following languages:
German: 6ES7635-1AA00-8AA0
English: 6ES7635-1AA00-8BA0
French: 6ES7635-1AA00-8CA0
Spanish: 6ES7635-1AA00-8DA0
Italian: 6ES7635-1AA00-8EA0
Siemens Controls
To Next Page
Loading...
