Siemens SIMATIC ET 200pro - Technical Specifications

CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
Operating Instructions, 11/2019, A5E35873416-AC
119
Technical specifications
12
General technical specifications
The CPU 1516pro-2 PN also complies with the standards and test values applicable to the
ET 200pro distributed I/O system. You can find detailed information on the general technical
specifications in the ET 200pro Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/21210852
) operating instructions.
Technical specifications of the CPU 1516pro-2 PN
The following table shows the technical specifications as of 11/2019. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7516-2PN00-0AB0/td?dl=en
).
Article number
6ES7516-2PN00-0AB0
General information
Product type designation
CPU 1516pro-2 PN
HW functional status
FS02
Firmware version
V2.8
Product function
• I&M data
Yes; I&M0 to I&M3
• Isochronous mode
Yes; Via X1, with minimum OB 6x cycle of 500 µs
Engineering with
• STEP 7 TIA Portal configurable/integrated
as of version
V16 (FW V2.8) / V14 (FW V2.0) or higher
Configuration control
via dataset
No
Control elements
Mode selector switch
1
Supply voltage
Type of supply voltage 24 V DC
permissible range, lower limit (DC)
20.4 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Mains buffering
• Mains/voltage failure stored energy time
5 ms
Input current
Current consumption (rated value)
0.31 A
Inrush current, max.
0.4 A; Rated value
I²t
0.001 A²·s