Siemens SIMATIC ET 200pro - Motor starters; 8.1 Overview; 8.1.1 Motor starters

Commissioning
8.7 Identification and maintenance data
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
92 Operating Instructions, 11/2019, A5E35873416-AC
8.7.2 Data record structure for I&M data
Reading I&M data records
You selectively access certain identification data via Read data record (RDREC instruction).
You obtain the corresponding part of the identification data under the relevant data record
index.
The data records are structured as follows:
Table 8- 6 Basic structure of data records with I&M identification data
Contents
Length (bytes)
Coding (hex)
Header information
BlockType 2 I&M0: 0020
H
I&M1: 0021
H
I&M2: 0022
H
I&M3: 0023
H
BlockLength 2 I&M0: 0038
H
I&M1: 0038
H
I&M2: 0012
H
I&M3: 0038
H
BlockVersionHigh
1
01
BlockVersionLow
1
00
Identification data
Identification data
(see table below)
I&M0/Index AFF0
H
: 54
I&M1/Index AFF1
H
: 54
I&M2/Index AFF2
H
: 16
I&M3/Index AFF3
H
: 54
Table 8- 7 Data record structure for I&M identification data
Identification data
Access
Default
Explanation
Identification data 0: (data record index AFF0 hex)
VendorIDHigh
Read (1 byte)
00
H
This is where the name of the manufac-
turer is stored (42
D
= SIEMENS AG).
VendorIDLow
Read (1 byte)
2A
H
Order_ID
Read (20 bytes)
6ES71516-2PN00-0AB0
Article number of module (e.g. CPU)
IM_SERIAL_NUMBER
Read (16 bytes)
-
Serial number (device-specific)
IM_HARDWARE_REVISION
Read (2 bytes)
1
Corresponding HW version
IM_SOFTWARE_REVISION
Read
Firmware version
Provides information about the firmware
version of the module
• SWRevisionPrefix
(1 byte) V
• IM_SWRevision_Functional_
Enhancement
(1 byte) 00 - FF
H
• IM_SWRevision_Bug_Fix
(1 byte) 00 - FF
H
• IM_SWRevision_Internal_
Change
(1 byte) 00 - FF
H