Configuring
5.2 Configuring the CPU
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
Operating Instructions, 11/2019, A5E35873416-AC
35
Procedure for reading out an existing configuration
1. Create a new project and configure an "Unspecified ET200pro Plus CPU".
Figure 5-1 Unspecified ET200pro Plus CPU in the device view
Note
To open the "Hardware detection for PLC_x" dialog, click the "Detect" link.
An alternative procedure is described in Step 2 and Step 3.
To Next Page
Loading...
