Siemens simatic et200sp Equipment Manual

Product overview
2.5 Mode switch
CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)
20 Equipment Manual, 05/2021, A5E03506268-AD
2.5 Mode switch
Use the mode switch to set the CPU operating mode.
The following table shows the position of the switch and the corresponding meaning.
Table 2- 1 Mode switch settings
Position
Meaning
Explanation
RUN
RUN mode
The CPU is executing the user program.
STOP
STOP mode
The user program is not being executed.
MRES
Memory reset
Position for CPU memory reset.

Siemens simatic et200sp Specifications

General

Category	I/O Systems
Power Supply	24 V DC
Protection Rating	IP20
Number of Modules	Up to 64 modules
Mounting	DIN Rail
Communication Protocols	PROFINET, PROFIBUS
Storage Temperature	-40 °C to +70 °C
Digital Inputs	Yes (depending on module)
Digital Outputs	Yes (depending on module)
Analog Inputs	Yes (depending on module)
Analog Outputs	Yes (depending on module)
Modularity	Modular
Relative Humidity	5 to 95% (non-condensing)
Weight	Varies by configuration
System Type	Distributed I/O