Siemens simatic et200sp - Page 39

Technical specifications
CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)
38 Equipment Manual, 05/2021, A5E03506268-AD
Article number
6ES7510-1DJ01-0AB0
Diagnostic buffer
• present
Yes
• Number of entries, max.
1 000
– of which powerfail-proof
500
Traces
•
Number of configurable Traces
4; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Diagnostics indication LED
•
RUN/STOP LED
Yes
•
ERROR LED
Yes
•
MAINT LED
Yes
•
Monitoring of the supply voltage (PWR-LED)
Yes
•
Connection display LINK TX/RX
Yes
Supported technology objects
Motion Control
Yes; Note: The number of technology objects
affects the cycle time of the PLC program; selec-
tion guide via the TIA Selection Tool
• Number of available Motion Control re-
sources for technology objects
800
•
Required Motion Control resources
–
per speed-controlled axis
40
–
per positioning axis
80
–
per synchronous axis
160
–
per external encoder
80
–
per output cam
20
–
per cam track
160
–
per probe
40
•
Positioning axis
– Number of positioning axes at motion
control cycle of 4 ms (typical value)
5
– Number of positioning axes at motion
control cycle of 8 ms (typical value)
10
Controller
• PID_Compact
Yes; Universal PID controller with integrated op-
timization
• PID_3Step
Yes; PID controller with integrated optimization
for valves
• PID-Temp
Yes; PID controller with integrated optimization
for temperature
Counting and measuring
• High-speed counter
Yes