Siemens simatic et200sp Equipment Manual

Technical specifications
CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)
Equipment Manual, 05/2021, A5E03506268-AD
41
Technical specifications of the BusAdapter BA 2×FC
Article number
6ES7193-6AF00-0AA0
General information
Product type designation
BA 2xFC
Interfaces
Number of PROFINET interfaces
1
Supports protocol for PROFINET IO
•
Number of FC (FastConnect) connections
2
Cable length
–
Cu conductors
100 m
Ambient conditions
Ambient temperature during operation
•
horizontal installation, min.
-30 °C
•
horizontal installation, max.
60 °C
•
vertical installation, min.
-30 °C
•
vertical installation, max.
50 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
2 000 m; On request: Installation altitudes greater
than 2 000 m
Dimensions
Width
20 mm
Height
69.5 mm
Depth
59 mm
Weights
Weight, approx.
53 g
General technical specifications
You can find information on the general technical specifications, such as standards and
approvals, electromagnetic compatibility, protection class, etc., in the system manual ET
200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293).

Siemens simatic et200sp Specifications

General

Category	I/O Systems
Power Supply	24 V DC
Protection Rating	IP20
Number of Modules	Up to 64 modules
Mounting	DIN Rail
Communication Protocols	PROFINET, PROFIBUS
Storage Temperature	-40 °C to +70 °C
Digital Inputs	Yes (depending on module)
Digital Outputs	Yes (depending on module)
Analog Inputs	Yes (depending on module)
Analog Outputs	Yes (depending on module)
Modularity	Modular
Relative Humidity	5 to 95% (non-condensing)
Weight	Varies by configuration
System Type	Distributed I/O