Siemens SIMATIC IPC - Connecting an IPC Edge Device; Requirements for adding an Edge Device

SIMATIC IPC Industrial Edge Device - Operation V1.3
Operating Manual, 09/2021, A5E51396302-AA
9
Connecting an IPC Edge Device
3
You have the following options to connect the IPC Edge Device to the IEM:
• Connecting through an USB flash drive
• Connecting through the IPC Edge Device UI
Both options require the IPC Edge Device configuration file.
Requirements for adding an Edge Device
• The IPC Edge Device is switched on.
• The IPC Edge Device is connected to the local network.