Siemens Simatic IPC547G

Technical specifications
8.8 Assignment of expansion interface to the software in the TIA Portal (CP assignment)
SIMATIC IPC547G
170 Operating Instructions, 04/2020, A5E49948632-AA
8.8 Assignment of expansion interface to the software in the TIA Portal
(CP assignment)
The table below shows the correlation between enclosure labeling of the IPC expansion slots
and the labeling that is used during assignment of interfaces to the software in the TIA
Portal.
Enclosure labeling
TIA Portal
1
X100
2
X101
3
X102
4 X103
5
X104
6
X105
7
X106