Siemens Simatic IPC547G

Overview
1.3 Accessories
SIMATIC IPC547G
28 Operating Instructions, 04/2020, A5E49948632-AA
1.3 Accessories
Accessories are available for your device. These are not included in the scope of delivery.
Information on available accessories is listed in the table below and on the Internet at the
following addresses:
● Industry Mall (https://mall.industry.siemens.com)
● IPC expansion components (http://www.automation.siemens.com/mcms/pc-based-
automation/en/industrial-pc/expansion_components_accessories)
Name
Description
Device
with
standard
enclosure
Device
with short
enclosure
Article number / MLFB
Retainer for
locking the in-
ternal USB
interface
The retainer is a mechanical safety device
for the internal USB interface. It optimizes
the protection of an internal USB memory
stick against loads caused by vibration
and shock during transportation or opera-
tion.
This increases the reliability and opera-
tional safety of the device.
x x 6ES7648-1AA00-0XK0
Tower Kit You can use the Tower Kit to convert the
device into an industrial Tower PC. This
step expands the operating range beyond
the control cabinet.
Components of the Tower Kit:
• Cover
• Feet
• Accessories: Screws and rubber feet
x x 6ES7648-1AA01-0XC0
(standard enclosure)
6ES7648-1AA01-0XE0
(short enclosure)