Expanding and assigning parameters to the device
6.1 Information on expansions
SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA
73
If the device is permanently installed or mounted on telescopic rails, it must not be subjected
to vibration stress during operation. The restrictions do not apply for the use of SSD.
Enclosure variant with drive cage type B
Drive in drive bay for internal robust installation
Hard disk type "Enterprise" is
possible
The maximum permitted power loss of the expansion cards is 80 W.
If the device is permanently installed or mounted on telescopic rails, it may be subjected to
the following vibration stress during operation:
● 20 to 58 Hz: 0.015 mm
● 58 Hz to 200 Hz: 2 m/s
2
Vibrations may not exceed 200 Hz.
D3445 4 X - - -
To Next Page
Loading...
Need help?
General
