Commissioning the device
4.4 Configuring the device
Comfort Panels
120 Operating Instructions, 03/2012, A5E03404994-02
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the network adapter display with the "Network&Dial-Up Connections" icon. The
image below shows the network adapter of a KP1500 Comfort.
Comfort devices of 15" or more come with the second network adapter "PN_X3".
The interface for the HMI devices KP400 Comfort and KTP400 Comfort is called "FEC".
2. Open the "PN_X1" entry.
The "'PN_X1' Settings" dialog box opens.
3. Open the "IP Address" tab.
4. Select the type of address assignment:
– To determine the address automatically, select "Obtain an IP address via DHCP".
– To determine the address manually, select "Specify an IP address".
To Next Page
Loading...
