Siemens SIMATIC KP400 Comfort - Mounting and Connecting the HMI Device

Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
3
Preface
Purpose of the operating instructions
These operating instructions contain information based on the requirements defined by DIN
EN 62079 for mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for:
● Users
● Commissioning engineers
● Maintenance personnel
Read especially the information in the chapter "Safety instructions" (Page 25).
You can find
more info
rmation such as operating instructions, examples and reference
information in the online help of WinCC.
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions. Knowledge of personal computers and the Microsoft
operating systems is required to understand this manual.
Scope of the operating instructions
The operating instructions apply to the following HMI devices in conjunction with the
WinCC software package:
● KP400 Comfort (4" Key Panel)
● KTP400 Comfort (4" Key&Touch Panel)
● KP700 Comfort (7" Key Panel)
● TP700 Comfort (7" Touch Panel)
● KP900 Comfort (9" Key Panel)
● TP900 Comfort (9" Touch Panel)
● KP1200 Comfort (12" Key Panel)
● TP1200 Comfort (12" Touch Panel)
● KP1500 Comfort (15'' key panel)
● TP1500 Comfort (15'' touch panel)
● TP1900 Comfort (19'' touch panel)
● TP2200 Comfort (22'' touch panel)