Commissioning the device
4.4 Configuring the device
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
91
Result
Registry entries and files from the temporary memory are saved in the internal memory of
the HMI device. The HMI device uses the saved registry entries the next time it starts. The
saved files are written back into the temporary memory.
The HMI device uses the saved registry information the next time it starts. The temporary
files are copied back.
See also
Reference for functions (Page 79)
4.4.4.4 Changing monitor settings
Adapting the screen settings
The screen settings on the HMI device must match the settings in the project. To achieve a
high color depth on the HMI device, use objects with the same color depth on your
configuring PC. Objects with higher color depth need more computing power on the HMI
device. If you are monitoring and controlling time-critical processes, use a lower color depth
during configuration.
NOTICE
Changed screen orientation takes effect only after reboot
With touch HMI devices, a change to the screen orientation only takes effect after you
reboot the HMI device. The configuration file is also deleted. Adapt the configuration to the
new screen orientation and transfer the project again to the HMI device.
Therefore, do not change the screen orientation in ongoing plant operation.
Requirement
The Control Panel is open.
To Next Page
Loading...
