Siemens SIMATIC KP400 Comfort - 4 Commissioning the Device; Overview; Backup Design

Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
55
Commissioning the device
4
4.1 Overview
4.1.1 Backup design
Introduction
The HMI devices use the following memory types:
● Internal memory
● Memory card
● System memory card
You can also connect a USB mass storage device to the USB port.
Internal memory
The following data is saved in the internal memory:
● Operating system
● Project file
● License keys
● User administration
● Recipes*
)
*
)
To save recipes in the internal memory, select "\Flash\" as the path in WinCC.
Note
Cyclic write access to the internal memory is not allowed
Cyclic write access to internal memory is not allowed, because this reduces the service life
of internal memory and of the HMI device.
To prolong the service life of your device, you should preferably use external memory cards
to store and log data, for example the SIMATIC HMI Memory Card.
Note
Number of allowed files in the root directory of the internal memory
The number of files in the root directory is limited to 256. The number of files is not limited in
the subdirectories of the internal memory.