Technical Support
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
171
Ex approval
The following approvals apply to the HMI device in accordance with
● EN 60079-0:2009
● EN 60079-15:2005
● EN 60079-31:2009
valid:
II 3 G Ex nA IIC Tx Gc
II 3 D Ex tc IIIC T 70 °C Dc IP65
x: Temperature values, see EC design examination certificate
The EC type examination certificates are available on the Internet at:
Technical Support (http://www.siemens.de/automation/csi_en_WW
)
The table below describes the test numbers of the HMI device classes:
Manufacturer site HMI device class Test number
Siemens AG
Industry Sector
Werner-von-Siemens-Straße 50
D-92209 Amberg, Germany
Comfort Panel DEKRA11ATEX0005X
Marking for Australia
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
IEC 61131
The HMI device fulfills requirements and criteria to IEC 61131-2, Programmable Logic
Controllers, Part 2: Operating resource requirements and tests.
See also
Currently valid certificates on the Internet
(http://support.automation.siemens.com
/WW/view/en/47182890/134200)
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
To Next Page
Loading...
