Mounting and connecting the HMI device
3.2 Mounting the device
Comfort Panels
38 Operating Instructions, 03/2012, A5E03404994-02
Mounting clamps Comfort
HMI device
Type Quantity Position on the HMI device
TP700 10
73&RPIRUW
KP700
TP900
TP1200
12
.3&RPIRUW
73&RPIRUW
73&RPIRUW
KP900
KP1200
Aluminum mounting clamps
16
.3&RPIRUW
.3&RPIRUW
KP1500
TP1500
TP1900
TP2200
Steel mounting clamps
12
.3&RPIRUW
73&RPIRUW
73&RPIRUW
73&RPIRUW
Requirement
● All packaging components and protective foils should be removed from the HMI device.
● To install the HMI device, you need the mounting clamps from the accessory kit.
● The mounting seal must be fitted on the HMI device.
To Next Page
Loading...
