ERPC functions
6.3 Configuration
CP 343-1 ERPC
48 Manual, 03/2010, C79000-G8976-C239-02
Figure 6-2 Properties dialog of the CP, "ERPC Symbols" tab
Waiting time when opening the properties dialog
When you open the properties dialog, a check is performed to determine whether any
changes have been made (see below), this means that it may take longer than normal to
open the properties dialog.
Functions in the "ERPC Symbols" tab
In this tab, you configure the ERPC symbols required for the ERPC communication.
You will find details of the information shown and the possible actions you can take in the
"ERPC Symbols" tab in the STEP 7 online help.
Information displayed
The list shows the ERPC symbols stored in the current STEP 7 project. The columns of the
symbol list display the following information:
● Info
Additional information from the check of changes made
● Symbol
Names of the ERPC symbols
To Next Page
Loading...
