Certification
6
The RUGGEDCOM RS900 device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1 Approvals
This section details the standards to which the RUGGEDCOM RS900 complies.
Note
All relevant certificates and test reports are available on Siemens Industry Online
Support [https://support.industry.siemens.com/cs/ww/en/ps/16008/cert].
6.1.1 UKCA
This device is certified for use in Great Britain and bears the United Kingdom Certified
Assessed (UKCA) marking. The marking is printed on the body of the device.
6.1.2 European Union (EU)
This device is declared by Siemens Canada Ltd. to comply with essential
requirements and other relevant provisions of the following EU directives:
• EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
• EN 63000
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
RUGGEDCOM RS900
Equipment Manual, 11/2023, C79000-G8976-1024-16
31
To Next Page
Loading...
Need help?
General