Certification
6.1.6TÜV SÜD
6.1.6 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
• CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
• UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
6.1.7 ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
• ISO 9001:2015
Quality management systems – Requirements
6.1.8 ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
• Radiocommunications (Compliance Labeling – Devices) Notice 2014 made under
section 182 of the Radiocommunications Act 1992
• Radiocommunications Labeling (Electromagnetic Compatibility) Notice 2017
made under section 182 of the Radiocommunications Act 1992
• Radiocommunications (Compliance Labeling – Electromagnetic Radiation) Notice
2014 made under section 182 of the Radiocommunications Act 1992
• Telecommunications (Labeling Notice for Customer Equipment and Customer
Cabling) Instrument 2015 made under section 407 of the Telecommunication
Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
RUGGEDCOM RS900
Equipment Manual, 11/2023, C79000-G8976-1024-16
33
To Next Page
Loading...
Need help?
General