Siemens SIMATIC NET S7-400 - Preface

CP 443-5 Extended
Equipment Manual, 01/2023, C79000-G8976-C162-10
3
Preface
① LED displays
② Mode selector
③ PROFIBUS interface (9-pin D-sub socket)
Validity
This manual contains information on the following products:
• CP 443-5 Extended
Article number: 6GK7443-5DX05-0XE0
Hardware version: 2
Firmware version: V7.1.9
Communications processor for connection of SIMATIC S7-400 / S7-400H to PROFIBUS
• CP 443-5 Extended
Article number: 6AG1443-5DX05-4XE0
Hardware version: 2
Firmware version: V7.1.9
Communications processor for connection of SIMATIC S7-400 / S7-400H to PROFIBUS.