Siemens SIMATIC NET S7-400 Equipment Manual

CP 443-5 Extended
Equipment Manual, 01/2023, C79000-G8976-C162-10
49
References
B
Where to find Siemens documentation
• Article numbers
You will find the article numbers for the Siemens products of relevance here in the
following catalogs:
– SIMATIC NET - Industrial Communication / Industrial Identification, catalog IK PI
– SIMATIC - Products for Totally Integrated Automation and Micro Automation, catalog
ST 70
You can request the catalogs and additional information from your Siemens
representative. You will also find the product information in the Siemens Industry Mall at
the following address:
Link: (https://mall.industry.siemens.com)
• Manuals on the Internet
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online
Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15661/man)
Go to the required product in the product tree and make the following settings:
Entry type “Manuals”
• Manuals on the data medium
You will find manuals of SIMATIC NET products on the data medium that ships with many
of the SIMATIC NET products.
On configuring and using the CP
/1/
SIMATIC NET
S7 CPs for PROFIBUS - Configuring and Commissioning
Manual Part A
Configuration Manual
Siemens AG
Link: (https://support.industry.siemens.com/cs/ww/en/view/1158693)

Siemens SIMATIC NET S7-400 Specifications

General

Brand	Siemens
Model	SIMATIC NET S7-400
Category	Conference System
Language	English