Siemens SIMATIC NET S7-400 Equipment Manual

Installation, wiring, commissioning, removal
3.4 Disassembly
CP 443-5 Extended
Equipment Manual, 01/2023, C79000-G8976-C162-10
35
3.4 Disassembly
WARNING
Improper disassembly
Improper disassembly may result in a risk of explosion in hazardous areas.
For proper disassembly, observe the following:
• Before starting work, ensure that the electricity is switched off.
• Secure remaining connections so that no damage can occur as a result of disassembly if
the system is accidentally started up.

Siemens SIMATIC NET S7-400 Specifications

General

Brand	Siemens
Model	SIMATIC NET S7-400
Category	Conference System
Language	English